Filter
Top Products
2-2 User’s Reference Guide
You will need:
■
A Windows 95, 98, or NT-based PC or a Macintosh with Ethernet connectivity for configuring the Netopia
R310. This may be built-in Ethernet or an add-on card, with TCP/IP installed.
■
An ISDN telephone line.
Identify the connectors and attach the cables
Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.
1. Connect one of the RJ-45 cables to any of the Ethernet ports on the router.
(If you are connecting the router to an existing Ethernet hub, use Ethernet port #1/Uplink on the router and
an Ethernet crossover cable.)
2. Connect one end of one of the RJ-45 cables to the Line port, and the other end to your ISDN line wall jack.
3. Connect the Power Adapter to the Power port, and plug the other end into an electrical outlet.
You should now have: the power adapter plugged in; the Ethernet cable connected between the router and
your computer; and the telephone cables connected between the router and the ISDN line wall jack.
4. Insert your Netopia CD and follow the instructions to install an Internet browser and the Adobe Acrobat
Reader, if you don’t already have them.
Console
Power
Line
Ethernet
Uplink
2 Line
3
1 Ethernet
Power
1
2
3
4