Filter
Top Products
Conair UCR-150L Robot isideal for applications requiring
quick, consistent part removal. The robot exchanges signals
via the SPI interface on the mold machine to ensure pre-
dictable, constant cycle times. This feature avoids setup prob-
lems and allows accurate time quoting for production and
maintenance schedules.
Use the UCR-150L Robot to eliminate common problems:
● inconsistent cycle times
● improper part/sprue separation
● unsafe sprue/part removal
The Conair UCR-150L Robot is a pneumatic robot that
removes the sprue/part from the injection molding machine.
The UCR-150L minimizes injection machine pause time with
a fast take-out time (1.5 second) by utilizing the slide cylinder
in addition to the main arm cylinder.
The robot is mounted on a fixed platen on the injection mold
machine. When the mold-open-complete signal goes from the
mold machine to the robot controller, the strip frame slides
down at the same time the main cylinder arm enters the mold
area; the gripper grips the sprue/part and removes the item to a
designated area. When the arm moves outside the mold area
the robot can release the sprue/part with or without the option-
al second descent.
W
HAT IS THE
UCR-150L
R
OBOT?
UCR-150L Robot UGR003/0900
2-2
DESCRIPTION
TYPICAL
APPLICATIONS