Filter
Top Products
UGR003/0900 UCR-150L Robot
INSTALLATION 3-9
Set the strip positions before connecting the air pressure line
to prevent damage to the equipment. To set the distance the
strip stroke moves forward and backward:
Open the mold.
Loosen the Forward and Backward Stroke
adjustment levers.
S
ETTING STRIP
POSITIONS
Backward Stroke
adjustment lever
Forward Strip
Stroke adjustment
levers
1
2
Forward shock
absorber
Move the Forward Stroke adjustment plate
by hand away from the main arm.
Move the main arm to the sprue grip position.
Push the Forward Stroke adjustment plate
toward the arm until the forward shock absorber is com-
pletely set. Tighten locknut on shock.
Lock the Forward Stroke adjustment levers.
This is the Strip Forward position.
Move the main arm to the strip back position.
Make sure the strip stroke is longer than the distance
needed for your application.
Lock the Backward Stroke adjustment lever.
This is the Strip Backward position.
Move the Backward shock absorber forward
until it is completely set. Tighten locknut on the shock
absorber.
3
4
5
6
Forward Stroke
adjustment plate
Backward shock
absorber
7
8
9
If you need to adjust
the strip stroke any time
after installation, always
be sure to disconnect
and drain the air pres-
sure before making the
adjustment.