Filter
Top Products
UGR003/0900 UCR-150L Robot
MAINTENANCE 5-3
WARNING: Voltage Hazard
This equipment is powered by alternating cur-
rent, as specified on the machine serial tag and
data plate.
Device must be properly grounded. Improper
grounding can result in severe personal injury
and erratic machine operation.
Always disconnect and lock out the incoming
main power source to the robot before perform-
ing non-standard operating procedures such as
routine maintenance. Only qualified personnel
should perform troubleshooting procedures that
require access to the electrical enclosure while
power is on.
All wiring, disconnects, and fuses should be
installed by qualified electrical technicians in
accordance with electrical codes in your region.
Always maintain a safe ground. Do not operate
the equipment at power levels other than what
is specified on the machine serial plate.
WARNING: High speed moving parts.
Do not enter maximum envelope area while
machine is operating. The maximum envelope
is the volume of space encompassing the maxi-
mum designed movement of ALL robot parts,
including the end of arm tooling, work piece and
attachments.
Do not operate machine unless interlocks/safety
devices are in place and function properly.
Robot may drop load. Do not walk under robot/
load. Failure to follow instructions could result in
injury.