Filter
Top Products
UGR003/0900 UCR-150L Robot
INSTALLATION 3-3
CAUTION: Moving the Robot
When you receive the robot, the swing arm is
bolted to prevent movement. Leave the bolt in
place until the robot is mounted on the press.
Remove after mounting.
WARNING: Improper installation, oper-
ation, or servicing may result in
equipment damage or personal injury.
This equipment should only be installed, adjust-
ed, and serviced by qualified technical person-
nel who are familiar with the construction, oper-
ation, and potential hazards of this type of
machine.
All wiring, disconnects, and fuses should be
installed by qualified electrical technicians in
accordance with electrical codes in your region.
Always maintain a safe ground. Do not operate
the equipment at power levels other than what
is specified on the machine serial tag and data
plate.
C
AUTIONS AND
WARNINGS