Filter
Top Products
You can choose any one of seven different molds, from M01
to M07. The control must be in the Stop mode.
To choose the mold:
Press the Stop button.
The robot stops. The control must be in the
Stop mode to choose a mold.
Press the Program button.
The current mold number is highlighted on
the display.
Use the Up and Down arrows
to move sequentially through the mold num-
bers, M01 to M07. Each mold number dis-
plays with each press of the arrows.
Press the Enter button.
When the mold number you want displays,
press the Enter button to choose that mold
number.
Press the Stop button
to return to the Stop mode.
UGR003/0900 UCR-150L Robot
OPERATION 4-7
C
HOOSING THE
MOLD
1
2
3
4
5