Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
TROUBLESHOOTING & REPAIR
F-46 F-46
IDEALARC DC-655
This is the typical DC open circuit voltage wave-
form generated from a properly operating
machine. Note that each vertical division repre-
sents 20 volts and that each horizontal division
represents 2 milliseconds in time. The machine
was loaded with a resistance grid bank. The
grid bank meters read 650 amps at 44 VDC.
Note: Scope probes connected at machine out-
put terminals: (+) probe to positive terminal, (-)
probe to negative high inductance terminal.
SCOPE SETTINGS
Volts/Div.....................20V/Div.
Horizontal Sweep.....2 ms/Div.
Coupling ............................DC
Trigger.........................Internal
TYPICAL OUTPUT VOLTAGE WAVEFORM - MACHINE LOADED
CONSTANT VOLTAGE MIG MODE
0 volts
2 ms
20 volts