Filter
Top Products
INSTALLATION
F-48 F-48
IDEALARC DC-655
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
This is NOT the typical DC open circuit voltage
waveform. One output SCR is not functioning.
Note the “gap” in the waveform. One SCR gate
is disconnected to simulate an open or non-
functioning output SCR. Each vertical division
represents 20 volts and each horizontal division
represents 2 milliseconds in time.
Note: Scope probes connected at machine out-
put terminals: (+) probe to positive terminal, (-)
probe to negative high inductance terminal.
SCOPE SETTINGS
Volts/Div.....................20V/Div.
Horizontal Sweep.....2 ms/Div.
Coupling ............................DC
Trigger.........................Internal
ABNORMAL OPEN CIRCUIT VOLTAGE WAVEFORM
CONSTANT VOLTAGE MIG
ONE OUTPUT SCR NOT FUNCTIONING
0 volts
2 ms
20 volts