Filter
Top Products
A-4 Appendix MN1854
Remote Keypad Mounting Template
0.23
(5.84)
2.0 (50.8)
0.66
(16.7)
3.09
(78.48)
3.184
(80.87)
3.25 (82.55)
0.75
(19.0)
4.0 (101.6)
2.04
(51.8)
3.39
(86.10)
3.034 (77.06)
4.154 (105.51)
4.380 (111.25)
4.838 (122.88)
EE
EE
MM
MM
B
BB
0.5 (12.7)
Cut–Out
1.5 (38.1)
Cut–Out
0.5 (12.7)
Cut–Out
Installation Notes.
1. For SAE mounting (6–32 hardware) mark and drill holes “E” with
3
/
16
" drill bit.
2. For metric mounting (M3.5 hardware) mark and drill holes “M” with
3
/
16
" drill bit.
3. For Ball–Head Removable mounting mark and drill holes “B” with
5
/
32
" drill bit.
4. To prevent damage to keypad, mounting screws must not extend more than 0.2" into keypad.
5. To isolate the keypad from the enclosure, use non–conductive mounting hardware.