Filter
Top Products
6-2 Keypad Programming MN1854
Value:
Units:
Range:
CL
Not Implemented syntax –
Value:
Units:
Range:
CT
Not Implemented syntax –
Value: N/A
Units: set in EDIT > SETUP > MECH > DIST
Range: Unit scaling dependent
Sets the next move position, referenced from absolute zero. The absolute zero position is established after a
Go Home move (GH) and/or with the Set Position (SP) command. Absolute positioning is typically used to
move between a number of known locations, or if the physical work area is restricted.
Incremental (DI) and absolute moves may be mixed; the control keeps track of the absolute position.
Example:
AC2 DE.5 VE12 DA3
GO Moves to absolute position 3 units.
DA3
GO DA3 GO Moves once to absolute position 3 units.
DA
Distance Absolute syntax – DA±r