Filter
Top Products
4-12 Keypad Operation MN1854
COPY, TO PAD Submenu Continued
To copy a program from a PC to the keypad, connect the keypad to the RS232
port of the PC (COM1 or COM2). Start the Application Developer software and
from the Communications menu, click on “Send All”. The keypad will display the
message “Receiving From PC” and a few more messages will quickly appear, then
disappear from the screen. When the keypad display is blank, the transfer is
complete.
COPY, FROM Submenu Copy a program from the keypad to the LinStep+ or to a PC.
Action
Display Comments
Press F3 (FROM). Four
messages are displayed
sequentially.
Receiving From EEPROM
Copies a program from the keypad to
LinStep+. When the “Saving To
Memory” message disappears, the
Sending To Drive
transfer is complete.
Waiting For Processing
Saving To Memory
To copy a program from the keypad to a PC, connect the keypad to the RS232
port of the PC (COM1 or COM2). Start the Application Developer software and
from the Communications menu, click on “Retrieve All” and choose “From
Keypad”. The keypad will display the message “Sending to PC” and a few more
messages will quickly appear, then disappear from the screen. When the keypad
display is blank, the transfer is complete.
DEL Menu The DEL (Delete) key allows you to delete any motion program.
Action
Display Comments
Press the DEL key.
↑DELETE PROGRAM↓
>6
Enter the program number. Or, if
you wish, you can scroll the list of
program names.
Press ENTER when finished.
DELETE PROGRAM #6
YES NO
Press F1 to delete program or F3 to not
delete the program.
DEL is also used to delete text or numeric characters in the editor. Use the cursor
control keys to move over the character you wish to delete, then press DEL.