Mitsubishi Electronics CR751-D Welding System User Manual


 
1-3
CE marking specifications
1General configuration
1.2.2 Combination of the robot arm and the controller
Table 1-1 Combination of the robot arm and the controller
1.3 CE marking specifications
The robot shown in Table 1-2 is the CE Marking specification.
Table 1-2 Robot models with CE marking specifications
1.4 Indirect export
The display in English is available by setting parameter LNG as "ENG."
1.5 Instruction manuals
The instruction manuals supplied in CD-ROM, except for the Safety Manual. This CD-ROM (electronic manual)
includes instruction manuals in both Japanese and English versions.
Protection specification
Robot arm
Arm
length
(mm)
J3-axis stroke
(mm)
Controller
General-purpose environment RH-3FH3515-1D 350
150
CR751-03HD-0
RH-3FH4515-1D 450
RH-3FH5515-1D 550
Clean specifications RH-3FH3512C-1D 350
120RH-3FH4512C-1D 450
RH-3FH5512C-1D 550
Robot type
Note1)
Note1) The "xx" indicate the arm length, "yy"indicate J3-axis stroke.
Controller External signal logic Language setting
RH-3FHxxyy-D1-S15
CR750-03HD1-1-S15
Note2)
Note2) The specification and the handling method of the controller are the same as standard type controller CR750-03HD-1.
Source type English (ENG)
RH-3FHxxyyC-D1-S15
Note3)
Note3) This robot is the clean specification. As long as there is no special description, refers to the contents of RH-3FHxxyyC
(clean specification).
RH-3FHxxyy-1D1-S15
CR751-03HD1-0-S15
Note4)
Note4) The specification and the handling method of the controller are the same as standard type controller CR751-03HD-0.
RH-3FHxxyyC-1D1-S15
Note3)