Mitsubishi Electronics CR751-D Welding System User Manual


 
2 Robot arm
Shipping special specifications, options, and maintenance parts
2-46
(1) Machine cable
Order type Fixed type.........CR750 controller: 1S-02UCBL-03 (2m)
CR751 controller: 1F-02UCBL-02 (2m)
Outline
This cable is exchanged for the machine cable (5 m for fixed type) that was supplied
as standard to shorten the distance between the controller and the robot arm.
Configuration
Table 2-12 Configuration equipment and types
[Caution] Orders made after purchasing a robot are treated as purchases of optional equipment. In this case, the
machine cable (5 m for fixed type) that was supplied as standard is not reclaimed.
Part name Type Qty. Mass (Kg)
Note1)
Note1) Mass indicates one set.
Remarks
Note2)
Note2) Standard 5 m (for fixed type) is not attached.
CR750 controller
Fixed Set of signal and power cables 1S-02UCBL-03 1 set 2.6 2m
Motor signal cable (1 cable) -
Motor power cable (1 cable) -
RCR751 controller
Fixed Set of signal and power cables 1F-02UCBL-02 1 set 2.6 2m
Motor signal cable (1 cable) -
Motor power cable (1 cable) -
<CR750 controller>
<CR751 controller>