Filter
Top Products
February 2001
VILTER MANUFACTURING CORPORATION
SECTION 102-R
Replaces
PAGE 1
April 1984
450 VMC COMPRESSORS
(High-Stage, Two-Stage, Booster and Heavy Duty)
REPLACEMENT PARTS LIST
(NOTE: Parts applying only to certain models are indicated throughout the parts list.)
TABLE OF CONTENTS
PAGE
1 REPLACEMENT PARTS ORDERING INSTRUCTIONS
BASIC FRAME REPLACEMENT PARTS
2 Illustration, 2 Cylinder (Figure 1)
3 Illustration, 4, 6 & 8 Cylinder (Figure 2)
4 Illustration, 12 & 16 Cylinder (Figure 3)
5 Parts List
DISCHARGE/SUCTION GAUGE
7 Illustration (Figure 4)
8 Parts List
CRANKSHAFT AND FRONT BEARING COVER REPLACEMENT PARTS
9 Illustration (Figure 5)
10 Parts List
REAR BEARING COVER REPLACEMENT PARTS
12 Illustration (Figure 6)
13 Parts List
CYLINDER LINER AND CAPACITY CONTROL REPLACEMENT PARTS
14 Illustration (Figure 7)
15 Parts List
PISTON AND CONNECTING ROD ASSEMBLY AND SAFETY HEAD REPLACEMENT PARTS
16 Illustration (Figure 8)
17 Parts List
CAPACITY CONTROL MECHANISM REPLACEMENT PARTS
18 Illustration (Figure 9)
18 Parts List
19 RECOMMENDED SPARE PARTS
REPLACEMENT PARTS ORDERING INSTRUCTIONS
1. Give the size and speed of the compressor, as well as serial number and refrigerant used. The serial
number is stamped on the nameplate and the compressor frame. The compressor frame serial number
location is directly above the suction flange on the frame of the compressor or directly above the rear bearing
cover. The rear bearing is located on the oil pump/filter end of the compressor.
2. Always give the name of the part as well as the corresponding part number and/or item number. Also
include the number of parts required.
3. Should there be a doubt regarding the part number or name, send a sketch of the part required or return the
old part as a sample, transportation charges prepaid. Orders on which part numbers and description do not
agree will be filled according to our best interpretation.
4. If parts that appear on the parts list do not appear on the price list, it is because they are sold only as an
assembly. All prices shown on the list are F.O.B. factory. Minimum domestic parts order is $75.00 net price.
Prices are for a single item unless otherwise specified in the price list.
5. Please indicate, on the order, preferred method of shipment. We will follow your instructions unless it is to
your best interest to change routing.
6. If you purchased the compressor from a party other than Vilter Manufacturing Corporation, please state
when you purchased the compressor and from whom.
VILTER MANUFACTURING CORPORATION
PRINTED IN U.S.A.