Filter
Top Products
Using Bluetooth
Start > Settings > Control Panel > Bluetooth or Bluetooth icon in taskbar or Bluetooth icon on desktop
or
Bluetooth taskbar icon
The MX3Plus default Bluetooth setting is Enabled.
The MX3Plus Bluetooth module is designed to Discover and pair with nearby Bluetooth devices.
Prerequisite: The Bluetooth devices have been setup to allow them to be “Discovered” and “Connected/Paired”. The System
Administrator is familiar with the pairing function of the Bluetooth devices.
Bluetooth Devices Display - Before Discovering Devices
Initial Configuration
1. Select Start > Settings > Control Panel > Bluetooth or tap the Bluetooth icon in the taskbar or on the desktop.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth MX3Plus default name is
determined by the factory installed software version. Honeywell strongly urges assigning every MX3Plus a unique
name (up to 32 characters) before Bluetooth Discovery is initiated.
4. Check or uncheck the MX3Plus Bluetooth options on the Settings and Reconnect tabs.
5. Tap the OK button to save your changes or the X button to discard any changes.
4-66