Filter
Top Products
Single Scan
Single Scan determines if scanner input is inhibited after a scan until the scanner is re-enabled. Off -
Single Scan mode is off. Auto - Single Scan mode is on. The scanner is disabled after a scan and
automatically re-enabled by the scanner driver after retrieving the bar code data. Man - Single Scan
mode is on. The scanner is disabled after a scan and the user application must call LXES-
cannerSSReset to re-enable the scanner. See the CE API Programming Guide for more details. This
option is only supported on Symbol (Motorola) internal and BTRS scanners. The scanner may
require a firmware upgrade to support this feature. Contact Technical Assistance for details.
Click here to view factory default settings for this panel.
4-120