Honeywell MX3Plus Saw User Manual


 
SaaS
Use to configure the Enabler to connect with Avalanche on Demand. This is a Software-as-a-Service version of Avalanche.
Using either of the SaaS configuration options below assumes the user has registered with Wavelink.
Disable SaaS No SaaS connection is used.
Scan Configure
SaaS
Scan bar codes printed from within the Avalanche Console to configure the Enabler for the SaaS con-
nection.
Manually Con-
figure SaaS
Manually enter the SaaS connection information. Enter the server address on the Connection tab and the
customer ID in the Company textbox.
5-19