Filter
Top Products
Connect
Connect the modem cable to the PC (the host) and the mobile device (the client). Select “Connect” from the Start Menu on the
mobile device (Start > Programs > Communications > Connect).
Note: Run “Connect” when the “Get Connected” wizard on the host PC is checking COM ports to establish a connection for
the first time.
Note: USB synchronization will start automatically when the cable is connected, not requiring you to select “Connect” from
the Start menu.
Disconnect
USB Connection
l Disconnect the cable from the mobile device.
l Tap the status bar icon in the lower right hand corner of the status bar. Then tap the Disconnect button.
IMPORTANT – Do not put the mobile device into Suspend while connected via USB. The device will be unable to connect to
the host PC when it resumes operation.
Serial Connection
l Disconnect the cable from the mobile device.
l Put the mobile device into Suspend.
l Tap the status bar icon in the lower right hand corner of the status bar. Then tap the Disconnect button.
Network Connection
l Put the mobile device into Suspend.
l Tap the status bar icon in the lower right hand corner of the status bar. Then tap the Disconnect button.
4-155