Honeywell MX3Plus Saw User Manual


 
Network Capture
Start > Settings > Control Panel > Network Capture
Note: Verify the date and time before using the logging utilities to ensure meaningful data.
The Network Capture panels provide configuration options for logging utilities.
Two types of logging are configurable:
Netlog is a Windows CE utility that monitors network traffic. Netlog creates a .CAP file that can be read using Microsoft
Windows Network Monitor or any compatible tool that supports .CAPfiles.
NDISLog monitors the NDISinterface between the Summit radio and the NDISdriver. This utility creates a .TXT log file.
Factory Default Settings
Netlog
Command options
pkt_size in bytes 5000
cap_size in bytes 500000
.cap file \netlog
Promiscuous Mode Disabled
NDISLog
Command stop
file \ndislog.txt
Netlog
Use this control panel to configure the Netlog utility. By configuring Netlog using the control panel, Netlog remains running
across a warmboot. However, please note that:
l Netlog first stores data to a file named netlog0.cap, then netlog1.cap. Any time the current file reaches maximum size,
Netlog switches to the other file.
l If the log file is stored in the root directory, any previous data is lost and a new log file started after the warmboot.
l If the log file is stored in \System, all previous data is saved across the warmboot.
l If Netlog is enabled across the warmboot, a series of brief popups may be displayed during the boot cycle. No user
interaction is required.
4-97