Filter
Top Products
Warmboot
A warmboot reboots the computer without erasing any registry data. However, any applications installed to RAM are lost, as is
all data in RAM. This occurs because the operating system is stored on the flash drive, but must be loaded into RAM to run.
All registry configurations are automatically preserved. Any applications stored as .CAB files in the System folder and
configured in the Registry to persist are reinstalled on boot up by the Launch utility.
Coldboot
A coldboot reboots the computer, erases all registry data and returns the computer to factory default settings. In order to be
preserved, applications and data must be stored in the System folder. Registry information is not preserved. Only factory
default applications and drivers stored as .CAB files in the System folder are loaded by Launch.
A cold boot is initiated by running the Coldboot application in the Windows folder. This application automatically cold boots the
MX3Plus, erasing any customer applied registry changes and returning the MX3Plus to its factory settings.
Clearing Persistent Storage / Reset to Default Settings
The coldboot utility sets all registry settings back to factory defaults. No other clearing is available or necessary.
4-3