Filter
Top Products
IRConnection
Note: You must establish a partnership with a desktop computer prior to running ActiveSync on the mobile device. The initial
partnership must be done using direct serial or USB cable connection.
Connect the correct cable to the PC (the host) and the mobile device (the client). Select “Connect” from the Start Menu on the
client (Start > Programs > Communications > Connect).
Note: Run “Connect” when the “Get Connected” wizard on the host PC is checking COM ports to establish a connection for
the first time.
Note: USB will start automatically when the USB cable is connected, not requiring you to select “Connect” from the start
menu.
Cables for initial ActiveSync Configuration
USB ActiveSync
MX3069CABLE - USB-Client cable, MX3Plus USB Client port to PC/Laptop USB port
Serial ActiveSync
9000054CABLE, RS232 9 Pin to 9 Pin, MX3Plus Serial port to PC/Laptop serial port
4-152