Honeywell MX3Plus Saw User Manual


 
Bluetooth Indicators
The Bluetooth taskbar Icon state changes as Bluetooth devices are discovered, paired, connected and disconnected.
There may be audible or visual signals as paired devices re-connect with the MX3Plus.
Taskbar Icon Legend
MX3Plus is connected to one or more of the targeted Bluetooth device(s).
MX3Plus is not connected to any Bluetooth device.
MX3Plus is ready to connect with any Bluetooth device.
MX3Plus is out of range of all paired Bluetooth device(s). Connection is inactive.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the MX3Plus Bluetooth scan range, the
Bluetooth connection between the paired device and the MX3Plus is lost. There may be audible or visual signals as
paired devices disconnect from the MX3Plus.
AppLock, if installed, does not stop the end-user from using Bluetooth applications, nor does it stop authorized Bluetooth-
enabled devices from pairing with the MX3Plus while AppLock is in control.
4-68