Enabling the Product CLISTs
BMC Software, Inc., Confidential and Proprietary Information
Chapter 4 Performing Post-Installation Tasks 4-7
• To enable access to additional data-sharing members or to the group
attach name, you must duplicate the table rows of the existing subsystem
name for each member or group attach name, substituting the member or
group attach name for the SSID column. The example in Figure 4-5 uses
the group attach name GRP1.
Figure 4-5 Enabling Access to Additional Members
*DATA
*PROD SSID D/I DOPT PLAN APPL COLL_ID NICKNAME
*----|----|-|--------|--------|----|------------------|------------------
ASU DBDB D ASUDOPD1 ASU
vrm
DC ASU5 *
ACT DBDB D ACTDOPD1 ACT
vrm
DM ACT5 ACT
vrm
_D_MAIN DBDB *
ACM DBDB D ACMDOPD1 CM
vrm
EDF ACM5 *
PSS DBDB D PSS
vrm
D1 PSS5 *
EXIT DBDB 'SYS3.DBDB.DSNEXIT' *
LOAD DBDB 'SYS2.DB2V62M.DSNLOAD' *
HLQ DBDB BMCADMN.V
vrm
.D62 *
VCAT DBDB DBDBCAT *
DDF DBDB DBDB *
ASU GRP1 D ASUDOPD1 ASU
vrm
DC ASUG *
ACT GRP1 D ACTDOPD1 ACT
vrm
DM ACTG ACT
vrm
_D_MAIN DBDB *
ACM GRP1 D ACMDOPD1 CM
vrm
EDF ACMG *
PSS GRP1 D PSS313D1 PSSG *
EXIT GRP1 'SYS3.DBDB.DSNEXIT' *
LOAD GRP1 'SYS2.DB2V62M.DSNLOAD' *
HLQ GRP1 BMCADMN.V
vrm
.D62 *
VCAT GRP1 DBDBCAT *
DDF GRP1 DBDB
In the example in Figure 4-5, the VCAT keyword is used by CATALOG
MANAGER and DASD MANAGER PLUS to indicate the name of a
data set that starts with an identifier for the catalog name (DBDBCAT).
• The example in Figure 4-6 shows the data rows (servers) that can be
listed in the CATALOG MANAGER CONNECT command panel. To
change the servers that the CONNECT command lists, you can add,
delete, or modify the data rows.
Figure 4-6 CATALOG MANAGER CONNECT Command Servers
*PROD SSID S SERVER NAME SSID COLL_ID NICKNAME
*----|----|-|-----------------|----|------------------|------------------
ACT AAAA S BBBB BBBB BBB_COLCT AAAABBBB *
ACT AAAA S CCCC CCCC CCCC_COLCT AAAACCCC *
