Replacing Authorization for a Processor
BMC Software, Inc., Confidential and Proprietary Information
Appendix A BMC Software Product Authorization A-17
Replacing Authorization for a Processor
Summary: Use the REPLACE Authorization for a Processor panel to replace one CPU
in the product-authorization table with another CPU. This process allows the
new CPU to run the product in place of the old CPU.
Step 1 Access the REPLACE Authorization for a Processor panel as follows:
1.A On the Product Authorization Primary Menu (Figure A-1 on
page A-11), select option 1.
1.B At Product load library, type a fully-qualified data set name and press
Tab.
1.C At Authorization password, type your permanent password and press
Enter.
The REPLACE Authorization for a Processor panel is displayed.
Figure A-6 shows a sample.
Figure A-6 REPLACE Authorization for a Processor Panel (SECEPREP)
Step 2 At Old serial number, type the serial number of the processor to be replaced.
SECEPREP REPLACE Authorization for a Processor
Command ===> _________________________________________________________________
Supply information for all input fields. Then press Enter.
Authorization password . . : 4XY YAL AMB 48S
Old serial number . . . 10293
Old model number . . . 9672 (for example, 9021, 9121, 3090)
New serial number . . . 10293
New model number . . . 9652 (for example, 9021, 9121, 3090)
F1=Help F2=Split F3=Exit F7=Bkwd F8=Fwd F9=Swap F12=Cancel
