BMC Software, Inc., Confidential and Proprietary Information
5-14 Administrative Products for DB2 Installation Guide
Default Option Descriptions
BLDCU=N Determines whether the BMC Software LOADPLUS utility updates statistics
in the DB2 catalog during loads for DB2 Version 4.1 or earlier (
Y or N).
BMCCHECK=N Specifies whether to use the BMC Software CHECK PLUS utility in place of
the IBM CHECK DATA utility, for checking referential constraint violations
in DB2 table spaces (
Y or N).
BMCCOPY=N Specifies whether to use the BMC Software COPY PLUS utility in place of
the IBM COPY utility. The DOPTs parameters are defined as follows:
Y Use BMCCOPY.
N Use IBMCOPY.
X Do not include copy operations.
F Do not include copy operations, but do start objects in copy pending
status with ACCESS(FORCE).
BMCLOAD=N Indicates whether to use the BMC Software LOADPLUS utility for loads, in
place of the IBM LOAD utility (
Y or N).
BMCSTATS=N Indicates whether to use the BMC Software BMCSTATS utility for updating
statistics in the DB2 catalog, in place of the IBM RUNSTATS utility (DB2
Version 4.1 or earlier). The DOPTs parameters are defined as follows:
Y Use BMCSTATS.
N Use RUNSTATS.
X Do not generate statistics.
BMCUNLD=N Specifies whether to use the BMC Software UNLOAD PLUS utility product
in place of ALTER UNLOAD (
Y or N).
BPOOLIX=BP0 Indicates the size of the buffer pool for user indexes. Valid values include
BP0 through BP49.
BPOOLTS=BP0 Indicates the size of the buffer pool for user data. Valid values include:
• BP0 through BP49
• BP8K0 through BP8K9
• BP16K0 through BP16K9
• BP32K,BP32K1 through BP32K9
CATAUDIT=N The DDL audit logging indicator. If you have CATALOG MANAGER
installed, an entry of
Y causes Execution to log executed DDL statements in
the CATALOG MANAGER DDL Audit Log (
Y or N).
