BMC Software, Inc., Confidential and Proprietary Information
4-40 Administrative Products for DB2 Installation Guide
Setting Up the SNA Gateway Server
5.C Select Users and Groups.
5.D Double-click the group Everyone.
5.E Add the previously defined Local LU alias and Remote LU alias
(MSAUL100 and ACVLU01, respectively, in Figure 4-21 on
page 4-37).
Step 6 Specify the SNA Gateway Server Control Point Name by performing the
following actions at the SNA Gateway Server console:
6.A Select the SNA Gateway Server Admin Icon.
6.B In the Servers and Connections window, select the server.
6.C From the Services menu, choose Properties.
6.D In the Server Properties dialog box, specify the following items:
1. Enter the Network Name. This name is the same as the VTAM
where the MVS Server resides.
2. Enter the Control Point Name. This name is the same as the
CPNAME parameter for the PU definition in VTAM (AUS3 in
Figure 4-21 on page 4-37). (See Step 1 on page 4-37.)
Where to Go from Here
After you set up the MVS Server and the SNA Gateway Server, you set up
the client. For more information, see “Setting Up the Client” on page 4-41.
