BMC Software, Inc., Confidential and Proprietary Information
5-22 Administrative Products for DB2 Installation Guide
Default Option Descriptions
SYSCUNIT=SYSDA Defines the default SYSCOPY unit.
SYSRMAX The SYSREC threshold, in cylinders, above which the utility will use the
secondary unit for allocation. If the size of a data set exceeds the threshold,
the utility uses the secondary unit. To avoid using the secondary unit,
specify 0.
SYSRMAXU The SYSREC secondary, or alternate, unit that is used for any overflow.
SYSRPREF='&&PREFIX..&&SSID..&&WORKID8'
Defines the default SYSREC data set prefix.
SYSRPS=10 Defines the default SYSREC primary space allocation.
SYSRSS=2 Defines the default SYSREC secondary space allocation.
SYSRUNIT=SYSDA Defines the default SYSREC unit.
SYSTYPE=S Defines the installation’s character set.
M mixed
S single-byte only
SZDEVT=3380 The device type for data set sizing for JCLGEN. Valid values are 3380 and
3390. The default is 3380.
TABLEACC=Y For DB2 Version 5.1 and later, indicates whether all tables remain accessible
during execution (
Y or N).
TABLEALL=N For DB2 Version 5.1 and later, specifies the STATS utility to gather
information for all columns of tables.
N Do not include the TABLE(ALL) parameter on stand-alone stats
runs.
Y Include the TABLE(ALL) parameter on stand-alone stats runs.
TAPE1=CART, TAPE2=TAPE, TAPE3=TAPE
Defines the valid installation tape unit names for your site.
TIMEPARM Indicates the TIME limit in minutes for each step in a batch job stream.
TSOSX=N Specifies whether your site uses the TSO Submit exit to supply the job
statements at submit time (
Y or N).
UNLDCOLL=N Explicit column list that is required on all BMC Software UNLOAD PLUS
unloads (
Y or N).
