BMC Software, Inc., Confidential and Proprietary Information
A-14 Administrative Products for DB2 Installation Guide
Adding Authorization for a Processor
Step 3 At New model number, type the model number of the processor for which you
are adding authorization and press
Enter.
A pop-up message on the Product Authorization Primary Menu explains that
the product-authorization table was modified successfully (Figure A-3).
Figure A-3 Product Authorization ADD Message
Step 4 Press F3 to exit the Product Authorization utility and return to the previous
menu or panel.
SECEPPRI <product-name> Product Authorization Primary Menu
COMMAND ===> ________________________________________________________________
Select an option. Type additional information if applicable. Then press Enter.
Options
_ 1. Process password (Requires product load library and password)
2. Display product authorization (Requires product load library only)
3. Display current processor information
4. Help about...
5. Exit
Additional information
Product load library...BMC.PRODUCT.LOAD
.-------------------------------------------------.
Authorization password . | BMC89127I PROCESSOR WAS SUCCESSFULLY ADDED TO |
| THE PRODUCT AUTHORIZATION TABLE. YOU ARE NOW |
| AUTHORIZED TO EXECUTE THIS PRODUCT ON SERIAL |
| NUMBER 10293, MODEL NUMBER 9672. PRESS ENTER TO |
| CONTINUE. |
'-------------------------------------------------'
F1=Help F2=Split F3=Exit F7=Bkwd F8=Fwd F9=Swap F12=Cancel
