Installation Paths
BMC Software, Inc., Confidential and Proprietary Information
Chapter 1 Preparing for Installation 1-17
Product Restrictions
Refer to the product-specific chapters for detailed information about using
the SSID installation path for a particular product. The following products do
not support the SSID installation path:
• ACTIVITY MONITOR for DB2
• APPTUNE
™
for DB2
• OPERTUNE
®
for MQ
• OPERTUNE
®
for DB2
• PACLOG
™
for DB2
• COORDINATED RECOVERY MANAGER (CRM)
• EXTENDED BUFFER MANAGER (XBM
™
) family of products
• Cross-System Image Manager (XIM
™
)
Multiple SSID Installation
The Multiple SSID installation path provides a way for you to use an initial
product installation as a model for installations on other DB2 subsystems. To
enable the Multiple SSID installation path, you must complete the following
tasks:
1. Select either the Full installation path or the SSID installation path.
• Use the Full installation path to install the selected products on a
single DB2 subsystem. (See “Full Installation” on page 1-14.)
• Use the SSID installation path to install the selected products on
another DB2 subsystem. (See “SSID Installation” on page 1-15.)
2. At the end of the Full or SSID installation, select option 3 in the JCL
Generation Options panel. This option generates installation batch jobs
for the specified DB2 subsystem, and builds a multiple SSID JCL model
for any additional subsystems.
When you complete these tasks and return to the Install System Main Menu,
the Multiple SSID option is displayed as menu option 5.
Considerations
The SSID installation process duplicates the installation of the selected
products for each additional DB2 subsystem. This duplication involves
assembling default options, creating tables and synonyms, and binding plans
on the additional DB2 subsystems. All of the considerations that apply to the
SSID installation path also apply to the Multiple SSID installation path. (See
“Considerations” on page 1-16.)
