BMC Software, Inc., Confidential and Proprietary Information
8-12 Administrative Products for DB2 Installation Guide
Default Option Descriptions
RECVPS=10 Defines the default primary space allocation in cylinders for RECVnnn
recovery data sets.
RECVSS=2 Defines the default secondary space allocation in cylinders for RECVnnn
recovery data sets.
RECVUNIT=SYSDA Defines the default unit that is used for creating RECVnnn recovery data sets.
RPLAN=ASUvrmDR The name of the DASD MANAGER PLUS plan that is used for displaying
online reports.
SL1 The STEPLIB library that contains the BMC Software load modules. You
can place DASD MANAGER PLUS load modules in the same library as
DB2. Keywords SL1, SL2, and SL3 indicate from what libraries DASD
MANAGER PLUS should load DB2 load modules.
SL2=('''SYS1.DSNEXIT''')
The optional first STEPLIB library for DB2 load modules. This library is
concatenated to the library that keyword SL1 specifies.
SL3=('''SYS1.DSNLOAD''')
The optional second STEPLIB library for DB2 load modules. This library is
concatenated to the library that keywords SL1 and SL2 specify.
SL4=('''SYS1.OTHER.LOADLIB1''')
Optional additional STEPLIB libraries.
SL5=('''SYS1.OTHER.LOADLIB2''')
Optional additional STEPLIB libraries.
SPLAN=ASUvrmDS The name of the DASD MANAGER PLUS plan that is used for statistics
collection.
SSID=DB2 Identifies the DB2 subsystem ID. The SSID must match the -SSID command
in the worklist. This parameter is required.
STATAUTH=Y The statistics authorization indicator. If the indicator is set to Y (the default),
DASD MANAGER PLUS checks users’ authorization to run BMCSTATS
and requires the same authorization as for RUNSTATS (
Y or N).
SWPS=10 The primary space allocation in cylinders for sort work data sets.
SWSS=2 The secondary space allocation in cylinders for sort work data sets.
SWU=SYSDA Describes the sort work unit.
