BMC Software, Inc., Confidential and Proprietary Information
A-18 Administrative Products for DB2 Installation Guide
Replacing Authorization for a Processor
Step 3 At Old model number, type the model number of the processor to be replaced.
Step 4 At New serial number, type the serial number of the processor that will
replace the old processor.
Step 5 At New model number, type the model number of the processor that will
replace the old processor and press
Enter.
A pop-up message on the Product Authorization Primary Menu explains that
the product-authorization table was updated successfully, replacing the old
processor with the new processor (Figure A-7).
Figure A-7 Product Authorization REPLACE Message
Step 6 Press F3 to exit the Product Authorization utility and return to the previous
menu or panel.
SECEPPRI <product-name> Product Authorization Primary Menu
COMMAND ===> ________________________________________________________________
Select an option. Type additional information if applicable. Then press Enter.
Options
_ 1. Process password (Requires product load library and password)
2. Display product authorization (Requires product load library only)
3. Display current processor information
4. Help about...
5. Exit
Additional information
Product load library...'BMC.PRODUCT.LOAD'
.-------------------------------------------------.
Authorization password . | BMC89129I PROCESSOR WAS SUCCESSFULLY REPLACED |
| IN THE PRODUCT AUTHORIZATION TABLE. YOU ARE NOW |
| AUTHORIZED TO EXECUTE THIS PRODUCT ON SERIAL |
| NUMBER 10293, MODEL NUMBER 9652. PRESS ENTER TO |
F1=Help F2=Split F3=Ex| CONTINUE. |
'-------------------------------------------------'
