Filter
Top Products
6 Technical data
Section 1: Introduction Operating and maintenance instructions
January 2015 3-9008-701 Rev J
1.4 Technical data
Materials of construction:
Standard: 17-4 stainless steel flow tube with hard chrome plating, carbon steel pipe and flanges
Standard maximum working pressure:
8" to 24" Size: 150 lb. ANSI 285 psig (1965 kPa) @ 100.F (38.C)
260 psig (1793 kPa) @ 200.F (93.C)
8" to 24" Size: 300 lb. ANSI 740 psig (5102 kPa) @ 100.F (38.C)
675 psig (4654 kPa) @ 200.F (93.C)
8" to 24" Size: 600 lb. ANSI 480 psig (10204 kPa) @ 100.F (38.C)
1350 psig (9308 kPa) @ 200.F (93.C)
34" and 40" Size: 300 lb. ANSI 740 psig (5102 kPa) @ 100.F (38.C)
675 psig (4654 kPa) @ 120.F (49.C)
For intermediate pressures refer to ANSI B16.5
Prover size based on flow tube diameter.
Maximum working temperature:
8” to 24" Size: -20 to 200.F (-29 to 93.C)
Follow all the safety and equipment limits recommended in 1.4 Technical data of this manual. It
is the owner’s and/or purchaser’s responsibility to comply with these parameters.
PERSONAL PROTECTION HAZARD
Follow all parameters for the compact prover indicated below.
Failure to do so may result in injury or equipment damage.