Filter
Top Products
14 Installation
Section 2: Installation and set-up Operating and maintenance instructions
January 2015 3-9008-701 Rev J
Important:
It is the customer's responsibility to install this equipment in a system that provides adequate
over-pressure protection.
Important:
Lines should be flushed thoroughly to rid piping of potentially damaging foreign material such
as welding bead, pipe scale, etc. before the prover is placed into service. A strainer of proper size
should be installed upstream of the prover to protect it from the introduction of foreign
material.
EXPLOSION HAZARD
Do not exceed the maximum working pressure of prover as stamped on the nameplates.
Failure to observe pressure rating limits may result in serious personal injury and equipment
damage.