Filter
Top Products
7 – SANsurfer iSCSI/FC Router Manager
Wizards
7-52 FI0154601-00 C
S
Add Initiator Wizard
The Add Initiator wizard provides a dialog box used to enter an iSCSI initiator into
the system database. iSCSI initiators are normally discovered (the router captures
their names and addresses) the first time they log in to the SANbox 6140 router.
This wizard allows you to enter the initiator information before the log in, thus
allowing you to map LUNs to the initiator before they log into the SANbox 6140
router.
When the wizard launches, the Create an initiator dialog box displays, as shown
in Figure 7-44.
Figure 7-44 Create an Initiator Dialog Box
To add an iSCSI initiator to the SANbox 6140 router:
1. Do the following:
a. Enter a name in the Initiator name box.
b. Enter an alias in the Initiator alias (iSCSI) box.
c. Select the OS from the OS Type Selection drop-down list box.
d. If you want to enable CHAP for this initiator, select the CHAP Enabled
check box. If you want a CHAP secret, enter the name in the
Initiator’s CHAP Secret box.
e. Click Finish.