Filter
Top Products
A – Command Reference
Commands
FI0154601-00 C A-45
A
Show iSCSI Command
Displays iSCSI information for the specified port. If the port is not specified, then
both ports are displayed.
Authority None
Syntax show iscsi [port_num]
Keywords [port_num]
The number of the iSCSI port to be displayed.
Examples The following example shows the show iscsi port command:
QRouter (admin) #> show iscsi
iSCSI Port Information
------------------------
iSCSI Port 1
Port Status Enabled
Link Status Up
iSCSI Base Name
iqn.2004-08.com.qlogic:isr-6140.0608a00471.0
MAC Address 00-c0-dd-0c-8b-e2
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway IP Address 0.0.0.0
Firmware Revision No. 3.00.02.44
No. of Open Connections 0
Target TCP Port No. 3260
MTU Size Normal
Window Size 32768
Window Scaling Enabled
Window Scaling Factor 1
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
Header Digests Enabled
Data Digests Enabled
Max Burst 262144
Max First Burst 65536
VLAN Disabled
IPv6 Address 1 ::
IPv6 Address 2 ::