Filter
Top Products
A – Command Reference
Commands
A-56 FI0154601-00 C
S
Show SNMP Command
Displays the router’s simple network management protocol (SNMP) and any traps
that have been configured.
Authority None
Syntax show snmp
Examples The following example shows the show snmp command:
QRouter (admin) #> show snmp
SNMP Configuration
------------------
Read Community Public
Trap Community Private
System Location
System Contact
Authentication traps Disabled
System OID
1.3.6.1.4.1.3873.1.5
System Description iSR-6140
Trap Destination 1
------------------
IP Address 10.0.0.5
Trap Port 1024
Trap Version 2