Filter
Top Products
C – Log Messages
Error Log Messages
FI0154601-00 C C-11
A
106813 #%d: QLIsrEventHandler: Unexpected async event (%x),
MB1=%x, MB2=%x, MB3=%x, MB4=%x, MB5=%x, MB6=%x,
MB7=%x
317
106853 #%d: QLTimer: Link error count (0x%x) exceeded, link down 357
106912 #%d: QLReserveLoopId: out of loop Ids 416
106928 #%d: QLMarkDeviceOffline: Device Id: %x marked offline,
cLinkDownTimeout = %x, cPortDownRetryCount=%x
432
106948 #%d: QLSnsGetAllNext: Name server login FAILED %x 452
107029 #%d: QLUpdateDeviceData: out of slots in host database 533
107030 #%d: QLUpdateDeviceData: out of slots in target database 534
107041 #%d: QLUpdateDeviceDatabase 0x%x: GET_ID failed %x 545
107056 #%d: QLUpdateDeviceDatabase 0x%x: out of slots in host data-
base
560
107078 #%d: QLUpdatePort 0x%x: out of slots in host database 582
87 The FC processor received a SCSI command for an unknown target path or
has run out of resources to execute additional commands.
93 The FC processor was disabled by an IOCTL request to the driver.
94 The FC processor firmware failed initialization. The request to initialize was
received by the driver in an IOCTL request.
96 The FC processor failed the external loopback test.
97 The FC processor failed to re-initialize in response to an IOCTL disable
request.
307 The FC processor reported a link down condition.
317 The FC processor reported an unexpected asynchronous event. The mail-
box registers provide status, event code, and data related to the event.
357 The driver has determined that the FC link is unreliable and unusable due to
the number of errors encountered. The link has been taken down.
416 The FC processor was unable to obtain the number of loop IDs required.
This failure occurs only when the FC processor is running multi-ID firmware.
432 The driver was unable to re-establish connection to the target within the tim-
eout and retry counts, and is therefore marking it offline.
Table C-6. Fibre Channel Driver—Error Log Messages (Continued)
ID Log Messages No.