Filter
Top Products
C – Log Messages
Error Log Messages
FI0154601-00 C C-9
A
iSCSI Driver
The following error log messages are common to both iSCSI ports, 1 (GE1) and 2
(GE2). They are listed in Tabl e C- 5 and described following the table. Log
messages beginning with #0 denote iSCSI port 1 (GE1). Log messages beginning
with #1 denote iSCSI port 2 (GE2).
.
324 iSCSI Login PDU was received with an invalid TSIH value. The TSIH is
invalid because there is no session with that TSIH value. This would occur if
the iSCSI initiator attempting the login failed to used the TSIH value provided
in the target login response PDU (router is target) in subsequent login PDUs.
1688 Event notification; iSCSI driver encountered a fatal error.
1689 Event notification; an IOCTL request was received to unload the iSCSI
driver.
1694 Event notification; attempt to connect to the iSNS server failed.
Table C-5. iSCSI Driver—Error Log Messages
ID Log Message No.
73990 #%d: QLUtmIoctlEnable: Initialize FW failed 262
74056 #%d: QLRunDiag: MBOX Diag test internal loopback
failed %x %x
328
74057 #%d: QLRunDiag: MBOX Diag test external loopback
failed %x %x
329
74241 #%d: QLiSNSEnableCallback: iSNS Server TCP Connect failed 513
74577 #%d: QLIsrDecodeMailbox: NVRAM invalid 849
74587 #%d: QLIsrDecodeMailbox: Link down 859
74656 #%d: QLReadyTimer: Adapter missed heartbeat for %d sec-
onds. Time left %d
928
74661 #%d: QLTimer: Abort pTpb=%p, Type %x, Timeout 0x%x Drv-
Count 0x%x, DdbIndex 0x%x
933
74663 #%d: QLReadyTimer: MBOX_CMD %04x %04x %04x %04x
%04x %04x %04x %04x timed out
935
74665 #%d: QLReadyTimer: QLiSNSReenable failed. 937
74784 #%d: QLUpdateInitiatorData: No more room in Initiator Data-
base.
1056
74800 #%d: QLSetTargetData: No more room in Target Database. 1072