Filter
Top Products
A – Command Reference
Commands
FI0154601-00 C A-15
A
Initiator Command
Adds, modifies, and removes an initiator in the router’s database.
Authority Admin session
Syntax initiator
add
mod
remove
Keywords add
Adds an initiator the router’s database.
mod
Modifies the settings of an initiator.
remove
Removes an initiator.
Examples The following example shows the initiator add command:
QRouter (admin) #> initiator add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
Only valid iSCSI name characters will be accepted. Valid characters
include lower-case alphabetical (a-z), numerical (0-9), colon, hyphen,
and period.
iSCSI Initiator Name (Max = 223 characters) [ ]
iqn.1991-05.com.microsoft:qlogic-09sd5i4l
OS Type (0=MS Windows, 1=Linux, 2=Other) [MS Windows ]
All attribute values for that have been changed will now be saved.
The following example shows the initiator mod (modify) command:
QRouter (admin) #> initiator mod
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 iqn.1991-05.com.microsoft:qlogic-09sd5i4l