Filter
Top Products
7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
7-26 FI0154601-00 C
S
Subnet Mask – The subnet mask used by the port. Although you may
modify the subnet mask in this window, you will typically set it using the
Configuration Wizard.
Gateway – The gateway for the selected port.
VLAN – The VLAN configuration: Disabled or Enabled. You can
configure VLAN from this window.
VLAN ID – When VLAN is enabled the VLAN ID contains an
identification value in the range 0 to 4094. You can configure VLAN
from this window.
Priority – When VLAN is enabled, this field defines the priority
assigned to this VLAN. To set the priority, click the drop-down arrow
and select the desired value (between 0 to 7).
IPv6 Address – When using an IPv6 address scheme, define the following
fields:
IPv6 Address1 – The first user-assigned IPv6 address to which the
port responds. A value of :: indicates that an IPv6 address has not
been assigned. Although you may modify the IP address in this
window, you will typically set it using the Configuration Wizard.
IPv6 Address2 – The second user-assigned IPv6 address to which
the port responds. A value of :: indicates that an IPv6 address has not
been assigned. Although you may modify the IP address in this
window, you will typically set it using the Configuration Wizard.
IPv6 Default Router – Use this address to set the default router for the
IPv6. The system can also set the IPv6 default router dynamically
depending on your network configuration.
IPv6 Local Link – This field contains the IPv6 link local address of the
port. It is not editable.
VLAN IPv6 – The VLAN IPv6 configuration: Disabled or Enabled. You
can configure VLAN from this window.
VLAN ID IPv6 – When VLAN IPv6 is enabled the VLAN ID IPv6
contains an identification value in the range 0 to 4094. You can
configure VLAN from this window.
Priority IPv6 – When VLAN IPv6 is enabled, this field defines the
priority assigned to this VLAN IPv6. To set the priority, click the
drop-down arrow and select the desired value (between 0 to 7).
NOTE:
IPv6 support is available only with hardware version 6 and software
version 2.4.0.0 and greater.