Filter
Top Products
A – Command Reference
Commands
A-38 FI0154601-00 C
S
Set VLAN Command
Configures the router’s VLAN parameters.
Authority Admin session
Syntax set vlan
Examples The following example shows the set vlan command:
QRouter (admin) #> set vlan
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
Configuring VLAN iSCSI Port: 1
--------------------------------
VLAN (0=Enable, 1=Disable) [Disabled ] 0
Priority (Min=0, Max=7) [0 ]
VLAN ID (Min=1, Max=4094) [0 ] 4
All attribute values for Port 1 that have been changed will now be
saved.
Configuring VLAN iSCSI Port: 2
--------------------------------
VLAN (0=Enable, 1=Disable) [Disabled ]
All attribute values for Port 2 that have been changed will now be
saved.