Filter
Top Products
4 – Installation
Firmware Installation
4-12 FI0154601-00 C
S
3. At the ftp prompt, type bin to set binary mode. For example:
ftp> bin
200 Type set to I.
4. Use the put command to transfer the firmware image file from the
workstation to the router. For example:
ftp> put isr-6140-2_0_6_3.bin
200 PORT command successful.
150 Opening BINARY mode data connection for
'isr-6140-2_0_6_3.bin'.
226 Transfer complete.
ftp: 4822816 bytes sent in 0.41Seconds
11878.86Kbytes/sec.
5. Enter quit. The firmware image has been transferred to the router.
6. Log on to the router as an administrator.
7. Enter the following command from the router, where x stands for the
firmware image name:
image unpack isr-6140-x_x_x_x.bin
The following message displays:
Unpack Completed. Please reboot the system for FW to
take effect.
8. Enter reboot. The following message displays:
Are you sure you want to reboot the System (y/n):
9. Type y to reboot the system.