Filter
Top Products
7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
FI0154601-00 C 7-25
A
iSCSI Port Information
The iSCSI Port Information area provides the following parameters:
Base Name – Full name assigned to the selected iSCSI port.
Link Status – Identifies the port connection status: Link Up or Link Down.
MAC Address – The MAC address assigned to the port. The MAC address
is not changeable.
Actual
Link Rate – Displays the actual link rate, which can be Unknown, 1000
Mbps, 100 Mbps, or 10 Mbps. If the port's configuration or connection has
changed, the status may not be current. Click the Refresh icon to display
the current status.
Programmed Link Rate – The configured data rate for the port. To
configure the data rate, click the drop-down arrow and select one of the
following data rates:
Auto - data rate determined by network attachment
10 Mbps - 10 megabits per second
100 Mbps - 100 megabits per second
1000 Mbps - 1000 megabits per second (1 gigabit per second)
Link Rate Mode – If you selected a specific Programmed Link Rate (not
Auto), you can specify one of these modes:
Auto
Half Duplex
Full Duplex
Flow Control – If you selected a specific Programmed Link Rate (not
Auto), you can enable or disable flow control.
iSCSI Port Network Settings
The iSCSI Port Network Settings area provides the following parameters:
Port Status – When the port link is up, you can enable or disable the port
using this drop-down list box.
IPv4 Address – When using an IPv4 address scheme, define the following
fields:
IP Address – The IP address to which the port responds. An
un-initialized port has an IP address of all zeros. Although you may
modify the IP address in this window, you will typically set it using the
Configuration Wizard.