Filter
Top Products
A – Command Reference
Commands
FI0154601-00 C A-27
A
Set CHAP Command
Configures general router parameters.
Authority Admin session
Syntax set chap
Examples The following example shows the set chap command:
QRouter (admin) #> set chap
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
Index iSCSI Name
----- ----------
0 iqn.2004-08.com.qlogic:isr-6140:test.0
1 iqn.2004-08.com.qlogic:isr-6140:test.1
2 iqn.1991-05.com.microsoft:qlogic-09sd5i4l
3
iqn.2004-08.com.qlogic:isr-6140:test.0.20000014c3449afa.22000014c3449
afa
Please select a presented target from the list above ('q' to quit): 2
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
CHAP (0=Enable, 1=Disable) [Disabled] 0
CHAP Secret (Max = 100 characters) [ ] ****
All attribute values for that have been changed will now be saved.