Filter
Top Products
A – Command Reference
Commands
A-68 FI0154601-00 C
S
Traceroute Command
Prints the route a network packet takes to the reach the destination specified by
the user.
Authority Admin session
Syntax traceroute
Examples
Traceroute command example:
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
IP Address (IPv4 or IPv6) [0.0.0.0] 172.17.136.18
Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...) [Mgmt ]
Tracing route to 172.17.136.18 over a maximum of 30 hops:
1 172.17.136.18 2.3ms 0.2ms 0.2ms
Traceroute completed in 1 hops.