Filter
Top Products
7 – SANsurfer iSCSI/FC Router Manager
Menu Bar
7-4 FI0154601-00 C
S
The Settings menu provides the following option:
Broadcast – Opens the Broadcast Settings window, which allows you to
configure the broadcast options. The workstation sends Broadcast
messages to locate routers within the same IP subnet as the workstation
running the SANsurfer Router Manager application. Figure 7-6 shows the
Broadcast Settings dialog box.
Figure 7-6 Broadcast Settings Menu
The following paragraphs describe its options.
Enable Broadcast – Enables broadcast messages sent to locate
routers in the IP subnet.
Enable Auto Connect – Enables the SANsurfer Router Manager to
automatically connect with routers discovered by the broadcast.
Broadcast Interval – Sets the time interval at which the SANsurfer
Router Manager sends broadcast messages to locate routers within
the same IP subnet as the workstation.
Wizards Menu
Figure 7-7 shows the Wizards drop-down menu.
Figure 7-7 Wizards Menu
The Wizards menu provides the following options:
Configuration Wizard – Launches the iSCSI Port Configuration wizard,
which allows you to configure the IP address and other parameters for an
iSCSI port (see page 7-45).