Filter
Top Products
7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
FI0154601-00 C 7-21
A
Actual Data Rate – The data rate at which the port operates when on-line.
This value can be one of the following:
1 Gbps - one gigabits per second
2 Gbps - two gigabits per second
Save – If you change the Port Status, click this button to save your
changes. A warning message opens, asking you to verify that you want to
change this status. Click Yes to proceed or click No to cancel changing the
status.
Advanced Configuration
The FC port display provides an Advanced Configuration tabbed page with
editable configuration parameters for the selected port, as shown in Figure 7-19.
Figure 7-19 FC Port Advanced Configuration Tabbed Page
To update the advanced port configuration:
1. Select the desired value from the drop-down list box next to the parameter
you want to change:
Connection Options – Select the connection options from the
drop-down list box: 0 - Loop Only, 1 - Point to Point Only, or 2 - Loop
Preferred, Otherwise Point to Point.
Data Rate – Select the data rate from the drop-down list box: Auto,
1Gbps, or 2Gbps.