Filter
Top Products
4 – Installation
Installing the SANbox 6140 Router
FI0154601-00 C 4-3
A
Installing the SANbox 6140 Router
Unpack the router and accessories. The SANbox 6140 router is shipped with the
following components, shown in Figure 4-1.
Power cord
Dongle for connecting the router’s serial port to a workstation used for
configuring and managing the router. A standard Cat5 Ethernet cable is
required (not supplied) to connect the dongle to the router. The dongle
connects directly to the workstation’s serial (COM) port.
Figure 4-1 SANbox 6140 Router and Accessories
To install the SANbox 6140 router:
1. Complete the pre-installation checklist (see page 4-4).
2. Mount the router (see page 4-4).
3. Install the transceivers (see page 4-4).
4. Connect the management workstation to the router (see page 4-5).
5. Configure the management workstation (see page 4-5).
6. Install the management application (see page 4-7).
7. Start the management application (see page 4-8).
8. Connect the router to AC power (see page 4-9).
9. Configure the router (see page 4-9).
10. Cable devices to the router (FC and iSCSI) (see page 4-10).