Filter
Top Products
A – Command Reference
Commands
A-10 FI0154601-00 C
S
FRU Command
Saves and restores the router’s configuration.
Authority Admin session to restore
Syntax fru
restore
save
Keywords restore
The fru restore command requires that you first ftp the tar file containing the
desired configuration to the router. When you issue this command, the system
prompts you to enter the restore level. You can fully restore the router’s
configuration (all configuration parameters and LUN mappings) or restore only the
LUN mappings. The restored configuration does not take effect until the router is
rebooted.
save
The fru save command creates a tar file containing the router’s persistent data,
configuration, and LUN mappings. The file is stored in the router’s /var/ftp
directory. You must then ftp the tar file from the router.
Examples The following example shows the fru restore command:
QRouter (admin) #> fru restore
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
Please reboot the system for configuration to take affect.
The following example shows the
fru save
command:
QRouter (admin) #> fru save
FRU save completed. Configuration File is QLogic_Router_FRU.bin
Please use FTP to extract the file out from the System.