Filter
Top Products
A – Command Reference
Working with SAN Router Configurations
FI0154601-00 C A-3
A
Save Router Configuration and Persistence
Perform the following steps to save the router’s configuration and persistent data.
Persistent data consists of LUN mappings, discovered FC targets, and discovered
iSCSI initiators.
1. Execute the fru save CLI command to generate a file
(iSR-6140_FRU.bin) containing the saved data (see page A-10). This
stores the file locally on the router in an FTP directory.
2. Transfer the saved data from the router to a workstation by executing an
FTP utility on a workstation. The following example shows an FTP transfer
to get the saved router configuration data:
c:\>ftp 172.17.137.102
Connected to 172.17.137.102.
220 (none) FTP server (GNU inetutils 1.4.2) ready.
User (172.17.137.102:(none)): ftp
331 Guest login ok, type your name as password.
Password: ftp
230 Guest login ok, access restrictions apply.
ftp> bin
200 Type set to I.
ftp> get iSR-6140_FRU.bin
200 PORT command successful.
150 Opening BINARY mode data connection for
'iSR-6140_FRU.bin' (6168 bytes).
226 Transfer complete.
ftp: 6168 bytes received in 0.00Seconds
6168000.00Kbytes/sec.
ftp> quit
221 Goodbye.